Back to the guides

Choosing the right roof rack for your rooftop tent

Takräcke monterat ovanpå ett hårdskalstält

The roof rack is the detail that decides whether a rooftop tent can go on your car at all. It's also the detail most people underestimate – many order the tent first and then discover the rack isn't up to it.

Here we go through what you need to check before you order: load capacity, roof type, bar spacing and the parts needed for the mounting itself.

Quick summary

  • It's the roof rack's dynamic load capacity that decides what you can drive with
  • Both the car's roof load and the rack's capacity must be enough – the lower of the two applies
  • The roof type determines which rack fits: raised rails, flush rails, fixed points or a bare roof
  • The bars must be spaced to match the rooftop tent's mounting rails
  • Retighten all fixings after the first few hundred kilometres and then before every season

Dynamic load capacity is what counts

Roof racks are given two ratings. The static load applies when the car is stationary – that is, when you're sleeping in the tent. The dynamic load applies when the car is moving, and that's the figure that decides whether you can drive with the tent mounted.

Work it out like this: the weight of the roof rack plus the weight of the rooftop tent must fit under the car's dynamic roof load, and also under the roof rack's own rated capacity. Our tents weigh between 50 and 91 kg depending on model and size – you'll find exact weights in each product description.

The full calculation, with examples, is in the guide how to work out your car's roof load.

Four roof types – and what they need

  • Raised rails – roof rails with a gap between the rail and the roof. The easiest to mount on, since the foot can grip around the rail
  • Flush rails – rails that sit directly on the roof with no gap. Need feet designed for that specific type
  • Fixed points – prepared points under strips or covers in the roof. Need a model-specific fitting kit
  • Bare roof – neither rails nor fixed points. Usually clamps into the door frames and has the lowest load capacity of the four

Check the car maker's or roof rack maker's compatibility guide before you buy. A rack that fits one generation of a model doesn't always fit the next.

Roof rack for a Harva Outdoors hard-shell tent

Bar spacing and rails

The bars need to be far enough apart for the tent's mounting rails, and they need to land on the car's fixing points. Bars that are too short give poor load distribution and wear on both the roof and the tent.

Two things to measure before you order:

  • The distance between the bars, so that both fall within the tent's mounting rails
  • The width of the bars, so the slide plates can be pushed out on both sides of the bracket

If you have a low-profile roof rack, it's also worth measuring the bolt length so the bolts don't touch the roof.

Material, shape and noise

  • Aluminium weighs less than steel, which frees up kilos for the tent itself
  • Aero (wing) profile bars give lower wind resistance and less whistling than round or square bars
  • Lockable feet are worth the money when the tent stays in a car park overnight

Checklist before you order

  1. Find out the car's dynamic roof load
  2. Find out what roof type the car has
  3. Check the roof rack's own dynamic load capacity
  4. Measure the bar spacing against the tent's mounting rails
  5. Add up rack plus tent and compare with the lower of the two limits
  6. Check that the tailgate clears when open

Parts you may need

If you already have a rooftop tent from us, you may need to add a mounting rail, mounting plates or slide plates. They're small parts that are easy to forget, and they stop the whole project if they're missing on mounting day.

What we sell ourselves

We don't sell standard roof racks or load bars. We do have load carriers – complete roof platforms developed for specific car models – and a roof rack for hard-shell tents that mounts on top of the tent for extra load.

Bison Gear roof platform for Toyota Land Cruiser 250 and Lexus GX550

After mounting

Retighten all fixings after the first few hundred kilometres and then before every season. Vibration works nuts loose over time, and it's cheaper to tighten them than to discover the play on the motorway.

The mounting process step by step is in the mounting guide. If you'd rather not do it yourself, we'll mount the tent for you in Kumla.

Frequently asked questions about roof racks for rooftop tents

Can I use a standard roof rack for a rooftop tent?

Yes, if the rack's dynamic load capacity covers the tent's weight and the bars are correctly spaced. It doesn't have to be a special rooftop tent rack.

Which figure applies if the car and the roof rack give different load capacities?

The lower of the two. Both are limits you must stay under, and a stronger rack doesn't raise the car's permitted roof load.

Can a rooftop tent be mounted on a bare roof without rails?

Often it can, but the capacity is lower than with rails or fixed points. Always check the roof rack maker's figures for your specific car model before deciding.

Can I have a roof box and a rooftop tent at the same time?

Rarely. Both take up space on the same bars and share the same roof load, and together they usually exceed the car's permitted weight.

How often should I retighten the fixings?

After the first few hundred kilometres with a newly mounted tent, then before every season and after long trips on rough roads.

Does the roof rack have to come off when the tent isn't on?

No, but an empty rack costs fuel and whistles. If it stays on all year, it's worth checking the feet and clearing debris from the slots now and then.

Does it whistle at speed?

Round and square bars are noisier than aero-profile bars. With the rooftop tent mounted, the noise is often reduced, since the tent breaks up the airflow over the bars.

Not sure what applies to your car? The fit guide lists the weight of every tent, and you can always get in touch with your model and model year and we'll work it out together.

Back to the guides